Denon AVR-2313CI Service Manual page 66

Error
Details of Error code
Code
DSP, PLD etc. failed to receive
5C firmware for rewriting sent from
DM860A (when timed out).
DSP, PLD etc. failed to receive
5D firmware for rewriting sent from
DM860A (when an error occurred).
Data in firmware such as DSP and
PLD for rewriting sent from DM860A
5E
was invalid (when a Check Sum error
occurred).
Invalid data in firmware such as
DSP and PLD for rewriting sent from
5F
DM860A was invalid (invalid data was
received).
NACK was received when "P"
60
command sent to DSP, PLD etc.
NACK was received when "I"
61
command sent to DSP, PLD etc.
Acquisition of serial flash data failed
80
before serial flash was deleted.
Deleting data failed before serial flash
81
was rewritten.
Receiving firmware for rewriting serial
82 flash sent by DM860A failed (when
timed out).
Receiving firmware for rewriting serial
83 flash sent by DM860A failed (when an
error).
Receiving firmware for rewriting serial
84 flash sent by DM860A failed (when a
Check Sum error).
Receiving firmware for rewriting serial
85 flash sent by DM860A failed (when
invalid data was received).
The data verification was invalid after
86
serial flash was rewritten.
Acquisition of (Application Mode) IP
A0 address failed before DM860A was
rewritten (AutoIP).
Acquisition of (Application Mode) IP
A1 address failed before DM860A was
rewritten (when timed out).
Invalid login via DPMS access
was notified when DM860A related
A2
firmware was rewritten (Application
Mode).
Display
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t e C h e c k N G
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t i n g
U p d a t i n g
C o n n e c t i o n F a i l A 0
C o n n e c t i o n F a i l A 1
L o g i n f a i l e d
66
Turn off and on the power.
f a i l 5 C
Updating starts automatically.
Turn off and on the power.
f a i l 5 D
Updating starts automatically.
Turn off and on the power.
f a i l 5 E
Updating starts automatically.
Turn off and on the power.
f a i l 5 F
Updating starts automatically.
Turn off and on the power.
f a i l 6 0
Updating starts automatically.
Turn off and on the power.
6 1
Updating starts automatically.
Turn off and on the power.
f a i l 8 0
Updating starts automatically.
Turn off and on the power.
f a i l 8 1
Updating starts automatically.
Turn off and on the power.
f a i l 8 2
Updating starts automatically.
Turn off and on the power.
f a i l 8 3
Updating starts automatically.
Turn off and on the power.
f a i l 8 4
Updating starts automatically.
Turn off and on the power.
f a i l 8 5
Updating starts automatically.
Turn off and on the power.
f a i l 8 6
Updating starts automatically.
Check the network connection.
Carry out the update in an environment
that has little network load.
Check the network connection.
Carry out the update in an environment
that has little network load.
Check the network connection.
Carry out the update in an environment
A 2
that has little network load.
Coping strategies