Lenovo ThinkPad T460s User Manual page 132

• Before removing the M.2 solid-state drive, make a backup copy of all the information on it, and then
turn off the computer .
• Never remove the M.2 solid-state drive while the computer is operating, in sleep mode, or in hibernation
mode.
To replace the M.2 solid-state drive, do the following:
1. Disable the built-in batteries. See "Disabling the built-in batteries" on page 113.
2. Close the computer display, and turn the computer over.
3. Remove the bottom cover. See "Replacing the bottom cover" on page 114.
4. Remove the screw that secures the M.2 solid-state drive.
5. Remove the M.2 solid-state drive.
6. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then carefully insert
the M.2 solid-state drive into the slot at an angle of about 20 degrees. Pivot the M.2 solid-state drive
downward.
116
ThinkPad T460s User Guide