Switching The Screen Between Full And Zoom (Aspect) - Epson EH-TW5350 User Manual

Adjusting the Image
Choices when projecting 3D images
Mode
3D Dynamic
3D Cinema

Switching the Screen Between Full and Zoom (Aspect)

You can change the input signal's type, aspect ratio, and resolution to match the Aspect of the projected
image.
The available settings vary depending on the image signal currently being projected.
Press the button to displays menus in the following order.
Signal - Aspect
Use the
press the button to confirm the selection.
c
You may not be able to change the Aspect depending on the signal.
By normally selecting Auto, the optimum aspect is used to display the input signal. Change the setting if you
want to use a different aspect.
The table below shows the image projected on a 16:9 screen.
Input Image
4:3 Images
16:9 Images
Images Recorded Using
Squeeze
*
Letterbox Images
Images are bright and sharper than 3D Cinema.
Produces crisper colors than 3D Dynamic.
buttons to select the item, and then
Normal
Application
Setting Name
Full
When projecting 16:9 images, Full and Zoom cannot be
selected.
34
Zoom