Zotac ZBox nano User Manual page 15

4
4. Connecting to an HDMI display
Connect one end of an HDMI cable to the HDMI port on the system rear panel
and the other end to a HDMI-compatible display such as an HDTV or monitor.
(When both the HDMI and the DP are connected, the audio output is from HDMI
by default.)
5. Connecting USB 3.0 device
Connect USB 3.0 devices such as external hard drives, SSDs and flash drives to
the USB 3.0 port.
6. Turning on the system
Connect the supplied AC adapter to the DC IN jack on the system rear panel and
then press the power switch on the front panel to turn on the system.
Note: When your ZOTAC ZBOX nano is not in use, unplug the power adapter or switch off the AC outlet
to conserve power.
5
6
ZOTAC ZBOX nano
15