Pro-Form Performance 400 User Manual page 21

THE INFORMATION MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been used and the total distance that the walking belt
has moved. The information mode also allows you to
select miles or kilometers as the unit of measurement.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The Incline/Calories display
will show the total number
of hours the treadmill has
been used.
The Time/Distance display
will show the total number
of miles (or kilometers)
that the walking belt has
moved.
An “"E”" for English miles or
an “"M”" for metric kilometers
will appear in the Heart
Rate/Speed display. Press
the Speed increase button
to change the unit of measurement if desired.
To exit the information mode, remove the key from the
console.
HOW TO USE THE SOUND SYSTEM
To play music or audio
books through the
console sound system
while you exercise, plug
a 3.5 mm male to 3.5
mm male audio cable
(not included) into the jack on the console and into a
jack on your MP3 player, CD player, or other personal
audio player; make sure that the audio cable is fully
plugged in. Note: To purchase an audio cable, see
your local electronics store.
Next, press the play button on your personal audio
player. Adjust the volume level using the volume
increase and decrease buttons on the console or the
volume control on your personal audio player.
If you are using a personal CD player and the CD
skips, set the CD player on the  oor or another  at
surface instead of on the console.
21