Synchronize Data - Motorola MOTORAZR V3c Motomanual

(in-use indicator). Once a connection is
established with a device, no other device can
connect to your phone until the currently
connected device is disconnected.
1 Highlight a device in the list of devices
your phone found.
2 Press the Select key to connect the device.
3 If the device requests permission to bond
with your phone, select YES and enter the
device PIN code to create a secure
connection with the device.
Note: The default PIN code is 0000.
When the connection is made, the à
(Bluetooth) indicator or a Bluetooth message
displays in the home screen.
Tip: For specific information about an
accessory, refer to the instructions that came
with it.

Synchronize Data

Use a USB cable connection to transfer and
synchronize data between your phone and a
PC.
Make sure that you connect your phone to a
high-power USB port on your computer (not a
low-power one such as the USB port on your
keyboard or bus-powered USB hub). Typically,
USB high-power ports are located directly on
your computer.
Note: If you connect your phone to a
low-power USB port on your computer, the
computer may not recognize your phone.
To transfer data between your phone and PC:
• You must use the cables and
install the Motorola Mobile
PhoneTools software included
with the Motorola Original™ data kit
Highlight Features 23