Sony CDX-GT51W Service Manual page 3

QQ
3 7 63 1515 0
• CD Playback
You can play CD-DA (also containing CD TEXT*) and CD-R/
CD-RW (MP3/WMA/AAC files also containing Multi Session)
and ATRAC CD (ATRAC3 and ATRAC3plus format).
Type of discs
CD-DA
MP3
WMA
AAC
ATRAC CD
* A CD TEXT disc is a CD-DA that includes information such as disc,
artist and track name.
TE
L 13942296513
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extension cable)
as shown below.
• Connect the MAIN board (CNP301) and the SERVO board (CN2)
with the extension cable (Part No. J-2502-076-1).
MAIN BOARD
CN350
www
.
http://www.xiaoyu163.com
Label on the disc
x ao u163
y
i
http://www.xiaoyu163.com
CDX-GT51W/GT510/GT560/GT560S
2 9
8
•
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
Q Q
3 6 7 1 3 1 5
co
.
9 4 2 8
0 5 8 2 9 9 4 2 8
J-2502-076-1
m
SERVO BOARD
CN2
9 9
9 9
3