Test Operation - LG WDM-1018 SERIES Service Manual

TEST OPERATION

Preparation for
washing.
Connect the power plug to
the outlet.
Connect the inlet hose.
Check the water heating.
Press both Spin and Option(Bio,
Rinse + ) button simultaneously the
present temperature will be
displayed.
Check drain and spin
Power off and then power on.
Turn on Spin lamps after
pressing the Start/Pause button
and Start the machine again.
Check drain and spin.
Press the power button.
In case of cotton program.
Check automatic reverse
turn.
Check if the drum rotates clockwise
and counterclockwise.
Power off and open the
door
Power off and then power on.
Check if the door can be
opened after Door Lock lamp
turns off.
9
Press the START/PAUSE
button.
Check the water supply.
Check if water is supplied through
the detergent dispenser.
Water removal
If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.