Setting The Presentation Timer - BenQ MX813ST User Manual

Setting the presentation timer

The presentation timer can indicate the presentation
time on the screen to help you achieve better time
management when giving presentations. Follow these
steps to utilize this function:
1. Press Timer Set up on the remote control or
go to the SYSTEM SETUP: Basic >
Presentation Timer menu and press MODE/
ENTER to display the Presentation Timer
page.
2. Highlight Timer period and decide the timer
period by pressing
minute increments and 5 to 240 minutes in 5-minute increments.
3. Press to highlight Timer display and choose if you want the timer to show up
on the screen by press
Selection
Always
Last 1 Min/Last 2
Min/Last 3 Min
Never
4. Press to highlight Timer position and set the timer position by pressing
Top-Left
5. Press to highlight Timer counting direction and select your desired counting
direction by pressing
Selection
Count Up
Count Down
6. Press to highlight Sound reminder and decide if you want to activate sound
reminder by pressing
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7. To activate the presentation timer, press
MODE/ENTER.
8. A confirmation message displays. Highlight Yes and press MODE/ENTER to
confirm. You will see the message "Timer is On" displaying on the screen. The
timer starts counting at the time the timer is on.
To cancel the timer, perform the following steps:
SYSTEM SETUP: Basic
1. Go to the
Off.
38
Operation
/ . The length of time can be set from 1 to 5 minutes in 1-
/
ing .
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 1/2/3 minute(s).
Hides the timer throughout the presentation time.
Bottom-Left Top-Right
/
.
Description
Increases from 0 to the preset time.
Decrease from the preset time to 0.
/ . If you select On, a double beep sound will be heard at
> Presentation Timer menu and highlight
Bottom-Right
and press / to select On and press
/ .