Remote Control - BenQ MX813ST User Manual

Remote control

1
2
3
4
5
6
7
8
9
I
1. Power
I
Toggles the projector between standby
mode and on. See
projector" on page 25
the projector" on page 46
2. Freeze
Freezes the projected image. See
the image" on page 40
3. Menu/Exit
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings. See
the menus" on page 28
4. Left/ Right
When the On-Screen Display (OSD) menu
is activated, the #5 and #10 keys are used
as directional arrows to select the desired
menu items and to make adjustments. See
"Using the menus" on page 28
5. Smart Eco
Displays the lamp mode selection bar(Normal/
Economic/Smart Eco).
Normal: This is the default setting(100%
Brightness)
Economic: 70% lamp power consumption.
Smart Eco: Lamp power consumption will
be changed from 30% to 70%
according to the content
brightness level.
12 Introduction
6.
10
11
5
12
13
7.
10
14
15
8.
9.
"Starting up the
and "Shutting down
for details.
"Freezing
10. Keystone/Arrow keys (
for details.
"Using
for details.
11. Auto
12. Mode/Enter
for details.
13. Source
Eco Blank
Press the Eco Blank button to turn off
the image and sound for a period of time
with up to 70% lamp power saving. Press
again to restore the image and sound.
See "Hiding the image" on page 39
details.
Digital Zoom keys (+, -)
Magnifies or reduces the projected
picture size. See "Magnifying and
searching for details" on page 32
details.
Volume +/-
Adjusts the projector's sound level. See
"Adjusting the sound" on page 40
details
Page Up/Down
Page up/down arrows when connected
through USB to a PC. See "Remote
paging operations" on page 39
details.
/ Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 27
details.
Automatically determines the best
picture timings for the displayed image.
See "Auto-adjusting the image" on page
26 for details.
Selects an available picture setup
mode. See "Selecting a picture mode" on
page 34 for details.
Activates the selected On-Screen
Display (OSD) menu item. See
the menus" on page 28 for details.
Displays the source selection bar. See
"Switching input signal" on page 31
details.
for
for
for
for
/ Up,
for
"Using
for