Defining Settings For 3G Mode - TrekStor SurfTab xiron 7.0 3G Operating Instructions Manual

Defining settings for 3G mode

There are various options for adjusting 3G mode to suit your requirements.
These can be found under "s
SIM card management
The following setting options vary depending on whether you have inserted
i
one or two SIM cards.
Tap "sim-
CaRd management
SIM Card Info
Drag the slider to the right of your data service provider to "on" in order to
activate the data service.
If you have inserted two SIM cards, you can activate or deactivate one or both
i
of the data service providers here.
You can call up the data from your SIM card by tapping the data service provider.
i
Data connection
You can deactivate the data connection by tapping "d
If you have inserted two SIM cards, you can select the desired data service
i
provider here.
Data roaming
You can active data roaming under this option. Tap "d
the box to the right of your data service provider if you would like to use data
roaming. A blue check mark will appear.
If you allow roaming, high roaming charges can be incurred!
a
Confirm the corresponding message with "ok".
If you have inserted two SIM cards, you can select the desired data service
i
provider for roaming here. Of course, you can also activate the roaming option
for both SIM cards.
Data usage
Here you can limit your data usage.
You can define all of the following settings for each card individually. To do this,
i
switch between "m
EN
20
".
ettings
". This opens a menu with the following setting options:
" and "m 2" by tapping the relevant option.
obiLe obiLe
".
ata ConneCtion
" and then tap
ata Roaming