Transmitter Clearances & Fixing - Worcester MT10RF Instruction Manual

75
45
2
F
6
TRANSMITTER
CLEARANCES & FIXING
250
160
D
3
6mm
30mm
4
E
B
FITTING & OPERATING INSTRUCTIONS FOR WORCESTER BOSCH
TRANSMITTER CLEARANCES:
See diagram opposite for minimum area
required for operation.
45
C B
1
5
MECHANICAL RF STAT TRANSMITTER & RECEIVER
8-716-106-196 issue a (10/03) UK
TRANSMITTER
CLEARANCES & FIXING
SAFETY:
All relevant safety precautions must
be undertaken. Protective clothing,
footwear, gloves and safety goggles
must be worn as appropriate.
TRANSMITTER FIXING:
1 Hold baseplate (B) level to mark
securing points (C) and remove
baseplate (B)
CAUTION: Ensure there are no
pipes, electric cables or other
hazards before drilling.
2 Drill holes, where marked, 30mm
deep using a 6mm diameter drill bit
3 Push one wall plug (D) into each hole
4 Reposition baseplate (B), check level
and secure with screws (E)
5 Align outer edge and internal lugs
(F) of transmitter to baseplate (B)
and push fit to secure