Receiver Functions - Worcester MT10RF Instruction Manual

A
Day
5∞C
12
9 3
6
5∞C
Night
Day
5∞C
12
9 3
6
5∞C
Night
Day
12 5∞C
9 3
6
5∞C
Night
A
B
Day
5∞C
12
9 3
6
5∞C
Night
8

RECEIVER FUNCTIONS

30∞C
Info
30∞C
1 sec
30∞C
Info
30∞C
30∞C
Info
30∞C
60 mins
4 mins
30∞C
Info
30∞C
FITTING & OPERATING INSTRUCTIONS FOR WORCESTER BOSCH
RECEIVER FUNCTIONS
NORMAL OPERATION:
TRANSMITTER SIGNAL RECEIVED:
LOW BATTERY STATE:
1 sec
EMERGENCY MODE:
9 mins
PROGRAMMING MODE:
2 mins
200ms
MECHANICAL RF STAT TRANSMITTER & RECEIVER
8-716-106-196 issue a (10/03) UK
LED (A) continuously on when the
boiler is on and continuously off
when the boiler is off.
Note: The LED is briefly interrupted
each time a signal is received.
LED (A) flashes twice each time a
signal is received from the
transmitter
LED (A) flashes slowly, on for one
second and off for one second
Replace batteries as shown under
'Battery Replacement' and the
receiver will revert back to normal
operation
If a signal is not received for 60
minutes LED (A) will flash rapidly
on and off and the boiler will be
continuously switched on for 4
minutes and off for 9 minutes
When a signal is received the
receiver will revert back to normal
operation
Press and hold button (B) down on
the receiver for approx. 2 seconds
until the LED (A) flashes twice and
stays on
Release button, the receiver will
now search for a signal from the
transmitter for up to 2 minutes
The LED (A) on the receiver will
flash twice, within 200ms, when a
radio link has been established.