Motorola M990 User Manual page 26

To use your M990 as a Bluetooth modem for a compatible
Bluetooth data device:
1. Make sure the other device is on and ready in
discoverable mode (for details about making the device
discoverable please refer to its user guide).
2. Press > Settings > Connection > Bluetooth Link >
Find Me.
If the M990 was already connected to a compatible
Bluetooth device in the past, a history list of such devices
will be displayed. Scroll to the desired device, press
Select and skip steps 3 to 4.
If the M990 was not connected to any compatible
Bluetooth devices in the past, it will search for available
Bluetooth devices that support the Dial-up Networking
Profile and display a list of the detected devices. If only
one Bluetooth device was found, the M990 will
automatically select it and you can skip step 3.
3. Scroll to the mobile device you wish to connect your M990
to and press Select.
4. If necessary, enter the other device passkey and press
Ok.
Note: The phone will put a GPRS call on hold when a voice
call enters. When you finish the voice call, the phone will ask
if you wish to resume the GPRS call.
Synchronize Phonebook & Datebook with another
Bluetooth Device
You can use your M990 to synchronize phonebook and
datebook entries with a compatible Bluetooth device.
To synchronize your M990 phonebook and datebook with a
compatible Bluetooth device:
1. Make sure the other device is on and ready in
discoverable mode (for details about making the device
discoverable please refer to its user guide).
18 – Main Attractions