ProForm power ZT10 User Manual page 12

6. Hold the Right Handrail (87) near the Right
Upright (90). Insert the Upright Wire (81) through
the Right Handrail as shown, and then remove
the wire tie (A) from the Upright Wire.
Next, attach the Right Handrail (87) to the Right
Upright (90) with two 5/16" x 2 1/2" Screws (28)
and two 5/16" Star Washers (11). Make sure not
to pinch the Upright Wire (81). Firmly tighten
the Screws.
Then, attach the Left Handrail (86) to the Left
Upright (89) in the same way. Note: There are
no wires on the left side.
7. If there are four screws (E) in the locations
shown, remove and discard them.
6
28
11
86
7
E
12
28
89
11
87
90
A
E
81