Remove Battery Cover; Remove; Install - Motorola IDEN I580 Field Service Manual

Basic and field level test procedures digital multi-service, data-capable portable
Hide thumbs Also See for IDEN I580:
Table of Contents

Advertisement

PREPARING FOR FIELD LEVEL TESTING: Remove Battery Cover
7.8

Remove Battery Cover

7.8.1

Remove:

1. Place thumb or fingernail against release latch (see Figure 7-2).
2. Push or pull down latch.
3. Hold latch in the down position and use fingernail to lift cover off housing bottom edge.
4. Pull cover down slightly to release from top clips and pull up to remove.
7.8.2

Install:

1. Bring top clips of cover into their respective slots.
2. While keeping clips engaged, close cover until release latch fully snaps into place.
48
2
3 3
Figure 7-2.
68P80401P05

Advertisement

Table of Contents
loading

Table of Contents