Technical Data - AEG FAVORIT 88060 VI User Manual

24

Technical data

Problem
The dishes are wet.
The dishes are wet and matt.
Activating the rinse aid dispenser
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold touchpad (4) and touchpad (5) at the same time until the indicators of
touchpads (3), (4), (5) and (6) flash.
4. Release touchpad (4) and touchpad (5).
5. Press touchpad (4).
• The indicators of touchpads (3), (5) and (6) go off .
• The indicator of touchpad (4) continues to flash.
• The display shows the setting of the rinse aid dispenser.
6. Press touchpad (4) to change the setting.
7. Deactivate the appliance to confirm.
TECHNICAL DATA
Dimensions
Water supply pressure
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The detergent can be the
cause.
The washing programme was
without a drying phase or with
a decreased drying phase.
The rinse aid dispenser is emp-
ty.
The multitab function is on
(this function automatically
deactivates the rinse aid dis-
penser).
Width
Height
Depth
Minimum
Maximum
Cold water or hot water
1)
Place settings
Possible cause
The rinse aid dispenser is off.
The rinse aid dispenser is on.
Possible solution
Use a different brand of deter-
gent.
For better drying results, keep
the door ajar for some minutes.
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispenser.
818 - 898 mm
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
maximum 60 °C
596 mm
550 mm
12