Care And Cleaning; End Of The Washing Programme; To Remove And Clean The Filters - AEG FAVORIT 88060 VI User Manual

20

Care and cleaning

Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point of interruption.
Cancelling the washing programme
If the washing programme has not started, you can change the selection.
To change the selection while the washing programme operates, it is necessary to cancel
the programme.
• Press the RESET touchpad until the display shows two horizontal status bars.
Make sure that there is detergent in the detergent dispenser before you start a new wash-
ing programme.

End of the washing programme

When the washing programme is completed, an intermittent acoustic signal sounds.
1. Open the appliance door.
• The end indicator is on
• The display shows a zero.
2. Deactivate the appliance.
3. For better drying results, keep the appliance door ajar for some minutes.
Remove the items from the baskets
• Let the dishes become cold before you remove them from the appliance. Hot dishes can
be easily damaged.
• First remove the items from the lower basket, then from the upper basket.
• There can be water on the sides and on the door of the appliance. Stainless steel be-
comes cool more quickly than the dishes.
CARE AND CLEANING

To remove and clean the filters

Dirty filters decrease the washing results.
Although the maintenance is very low with these filters, make a check at intervals and if
necessary, clean them.