EnGenius EP801 Quick Installation Manual

EP801 - Long Range Cordless System
Base station installation
1. Install base station antenna.
2. Plug the transformer end of the base station AC/DC adapter into a standard AC electrical power outlet, plug
the other end into the "DC IN" jack on the back of the base station.
3. Plug phone cord into the "LINE" jack.
4. A standard telephone or answering machine can be plugged into the adjacent receptacle on the bottom of
the base station marked TEL.
Handset and charger installation (Charger only for EP801 HC)
1. Plug the transformer end of the charger AC/DC adapter into a standard AC electric power outlet, plug the
other end into the "DC In" jack on the back of the charger.
2. Install battery pack onto the handset.
3. Install handset antenna.
4. Place handset onto the charger front slot.
5. Fully charge the battery for three hours before use.
6. The phone system is now ready to perform basic functions such as making and receiving phone calls and intercom calls. No base station
or handset programming is needed for basic operations.
Handset registration
1. Press MENU-7 to enter the registration mode.
2. Press and hold the base' registration (REG) button for 2 seconds until and LEDs lighting up and ashing, also the base will
emit ringing to remind you the base is in registration mode.
3. Press handset key "1", this completes the registration process. The base station will assign a handset ID between 12 and 19. The assigned
ID will be displayed on the handset LCD, indicating sucessful registration.
Handset features
1. TALK/FLASH
a. Places or answers a telephone or intercom call.
b. Sends a ash signal to phone line to retrieve a dial tone after the call ends, or to perform the call waiting feature provided by local phone
companies during a call.
2. SPEAKERPHONE
a. Press the key to enable/disable the speakerphone during incoming, outgoing or intercom call.
3. 2-WAY INTERCOM/TRANSFER
a. Places an intercom call to another handset, a group handsets (group paging) or all registred handsets.
b. Intercom calls are digital, full duplex and are conducted without the assistance from the base.
4. BROADCAST
a. Half duplex broadcasting to handsets for immediate announcement.
b. Half duplex broadcasting to base stations.
Re-press the key on the side of handsets to activate the broadcast function.