Do Not Disturb - GE 29115 series User Manual

Do Not Disturb

This feature allows you to turn off the base ringer and
handset ringers for all handsets registered with the base
unit. The answerer speaker will be silenced when the unit is
receiving incoming messages.
Press the do not disturb button on the base. Handset will
display DO NOT DISTURB.
NOTE: If DO NOT DISTURB is activated during an
incoming ring, it will only be effective from the
next incoming call.
Flash/Call Waiting
If you subscribe to the combined Call Waiting Caller ID service
from your local telephone company, you will receive Caller ID
information (if available) on Call Waiting calls. During a phone
call, you will hear a beep to indicate another call is waiting on
the line and Caller ID information for the waiting call shows on
the handset display.
• To connect to the waiting call, press the flash button on
the handset, and your original call is put on hold.
• To switch between the two calls, press the flash button.
TIP: Do not press the TALK/CALL BACK button
on the handset to activate a custom calling
service, such as call waiting, or call will
disconnect.
6