Handset Setup - GE 29115 series User Manual

NOTE: While in room monitoring mode, the
handsets will emit an alert tone approximately
every 5 seconds if there is an incoming call. You
may press the SPEAKER button to quit room
monitor and answer the call.
NOTE: While in room monitoring mode, the
originating handset can be switched to
monitor by handset earpiece by pressing the
TALK/CALL BACK button once. Switch back to
speakerphone by pressing the SPEAKER button
once.
NOTE: Press the *tone/exit button on the
handset to exit room monitor mode.

Handset Setup

1. Make sure your phone is OFF (not in TALK mode).
. Press the program/mute button to go to the main menu.
. Press caller ID-volume ( 6 or 5) button to scroll to
HANDSET SETUP.
. Press program/mute button to confirm and you may
program the following items: Set Language, Handset
Name, Ringer Tone, Ringer Volume, Message Alert,
Ring To Answer, Security Code, VIP Melody, Key Tone,
Audio Predial, Vibrate Ringer, Area Code, Tone/Pulse,
Registration, Deregistration and Default Setting.
6