Door Reversibility - Frigidaire FRF55W User Manual

Table of Contents

Advertisement

100 mm . Ideally, however, the appliance
should not be positioned below
overhanging wall units. Accurate levelling is
ensured by one or more adjustable feet at
the base of the cabinet.
100 mm
15 mm

Door reversibility

WARNING!
Before carrying out any operations,
remove the plug from the power
socket.
CAUTION!
To carry out the following operations,
we suggest that this be made with
another person that will keep a firm
hold on the doors of the appliance
during the operations.
1. Tilt back the appliance carefully so that
the compressor cannot touch the floor.
2. Unscrew both adjustable feet.
3. Unscrew the screws of the door bottom
4. Take off the appliance door by pulling it
5. Unscrew the top door hinge pin of the
15 mm
6. Fit the appliance door on the upper door
7. Remove the lower hinge. Put over the
8. Unscrew and install the screw on the
9. Install the lower hinge on the opposite
10. Screw in the one screw in the place set
11. Remove and install the handle on the
INSTALLATION
hinge.
slightly downwards.
appliance then screw it back on the
other side.
2
hinge pin.
pin in the direction of the arrow.
opposite side.
side leaving the position of the door
unchanged.
free on the other side as well as the
adjustable feet (2 pieces).
opposite side.
1
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents