Sony Bravia KDL-52X2000 Operating Instructions Manual page 44

Sound
Problem
No sound, but good picture
Noisy sound
Channels
Problem
The desired channel cannot be
selected
Some channels are blank
Digital channels are not
displayed
Some channels cannot be
selected
General
Problem
The TV turns off automatically
(the TV enters standby mode)
The TV turns on automatically
Some input sources cannot be
selected
The remote does not function
The recorded images appear
enlarged when they are played
on a 4:3 screen size TV
Forgotten Parental Control
password
44
GB
Cause/Remedy
• Press 2 +/– or % (Mute).
• Check that "Speaker" is set to "On" in the "Setup" menu (page 29).
• See "Picture noise" causes/remedies on page 43.
Cause/Remedy
• Switch between digital and analog mode and select the desired digital/
analog channel.
• Scrambled/Subscription only channel. Subscribe to the Pay Per View
service.
• Channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.
• Contact a local installer to find out if digital transmissions are provided in
your area.
• Upgrade to a higher gain antenna.
• Once you select a channel within your Favorite List of channels, pressing
PROG +/- will select only channels from your Favorite List. To select a
channel that has not been programmed as a Favorite List channel, use the
Program List feature or the number buttons.
Cause/Remedy
• Check if the "Sleep Timer" is activated, or confirm the "Duration" setting of
"On Timer" (page 28).
• Check if the "On Timer" is activated (page 28).
• Select "Video Labels" in the "AV Setup" menu and cancel "Skip" of the
input source (page 30).
• Check that the remote is set correctly for the equipment you are using.
• Check whether the equipment you want to use corresponds to the function
button being pressed (page 13).
• If the remote does not operate the equipment even when the remote has been
set correctly to the equipment, enter the necessary code as explained in
"Programming the remote" (page 40).
• Replace the batteries.
• The images of digital broadcasting recorded on this TV appear enlarged
when they are played on a 4:3 screen size TV that cannot be adjusted to
other aspect modes.
• Select "All Reset" in the "Setup" menu (page 29).