Sony Bravia KDL-52X2000 Operating Instructions Manual page 29

Cinema Drive
Speaker
Audio Out
Light Sensor
Logo Illumination
Product Information
All Reset
Provides smoother picture movement when playing DVD or VCR images taken on
film, reducing picture blur and graininess.
"Auto 1": For a stable picture with minimal noise. Set to "Auto 2" if the screen is
partially degraded.
"Auto 2": Use this setting for standard use.
"Off": Turns off the Cinema Drive.
Notes
• Even if "Auto 1" or "Auto 2" is selected, "Cinema Drive" will be automatically turned off
and a moving image will not be played smoothly if the image contains irregular signals or
too much noise.
• "Cinema Drive" is not available when using Freeze or Twin Picture features, or when
watching 480p, 576p, 720p or 1080p sources.
Switches on/off the TV's internal speakers.
"On": The TV speakers are turned on in order to listen to the TV's sound through the
TV speakers.
"Off": The TV speakers are turned off in order to listen to the TV's sound only
through your external audio equipment connected to the audio output jacks.
"Variable": The audio output from your audio system can be controlled by the TV's
remote.
"Fixed": The audio output of the TV is fixed. Use your audio receiver's volume
control to adjust the volume (and other audio settings) through your audio system.
"On": Automatically optimizes the picture settings according to the ambient light in
the room.
"Off": Turns off the "Light Sensor" feature.
Lights up and turns off the Sony logo on the front of the TV.
Displays your TV's product information.
Resets all settings to the factory settings and then displays the Auto Startup screen.
Note
All settings, including Digital Favorite list, auto tuned channels, etc. will be reset.
29
GB