Placing Calls From Memory; About Recalling From Memory; Placing Calls By Entering Two-Digit Number - Motorola ENHANCED CELLULAR TELEPHONE Owner's Manual

About Recalling from Memory

Phone numbers stored in memory can be recalled in either
of the following two ways:
• By entering a two-digit location number
• By scrolling using the Memory Location Numbers
Using any of these methods, once a phone number is
displayed, you may place a call to that number by pressing
.
SND
NOTE You may also scroll through the memory locations
while in a call (for instance, if you want to look up a phone
number to pass along to the other party). When finished,
press . This will cancel scrolling, but will not end your
END
current call.
Placing Calls by Entering Two-Digit
Number
1. Press .
RCL
2. Enter the desired two-digit location number. The
display shows the location number, then the last 10
digits of the stored phone number. Press
view the complete number.
3. Press
SND
two-digit memory location.

Placing Calls From Memory

to place a call to the number stored at the
again to
RCL
15