Placing Calls From Memory
Placing Calls by Scrolling
This method allows you to review your memory locations
by memory number, beginning with the location of your
choice. This is useful when searching for a specific number
in memory when you are not certain of its location.
1. Press
RCL
number where you wish to begin your review. (For
example, to scroll from the beginning, press
,
0
2. The location number and digits stored will appear in
the display. An apostrophe (') following the location
number confirms that you have enabled memory
scrolling.
3. Press
Press
4. At any time while scrolling, you may press
place a call to the displayed number.
NOTE Memory Scrolling may also be performed during a
call. Pressing
extinguishes the apostrophe (') and cancels scrolling, but
does not terminate the call.
16
, then the two-digit memory location
.)
1
to scroll forward thru the memory locations.
to scroll backwards.
while scrolling during a call
END
,
RCL
to
SND