Route Setup - Sapido RB-1602G3 User Manual

5.6.10 Route Setup

Dynamic routing is a distance-vector routing protoc ol, which employs the hop count as a
routing metric. RIP prevents routing loops by implementing a limit on the number of hops allowed
in a path from the source to a destination. The maximum number of hops allowed for RIP is 15
Static routing is a data communication concept describing one way of configuring path
selection of rout ers in computer networks. It is the type of routing characterized by the absence of
communication between rout ers regarding the current topology of the net work. This is achieved by
manually adding routes to the router routing table.
Item
Enable Dynamic Route
NAT
Transmit
Receive
http://www.sapido.com.tw/
Description
Enable or Disable dy namic route
Enable or Disable NAT function
There are 3 options：
1. Disable：do not send any RIP packet out
2. Send RIP 1 packet out
3. Send RIP 2 packet out
There are 3 options：
4. Disable：do not rec eive any RIP packet
5. Only receive RIP 1 packet
6. Only receive RIP 2 packet
71
User Manual v1. 0.0