Sony DPP-EX7 Service Manual page 25

10. Press the PRINT key.
n
Although a step image is automatically printed, it is not used.
11. After the printing is completed, tap the mid-density (fourth from the top of the left column) of the
adjustment icon.
12. When you hear a beep sound, the screen goes back to the menu screen of the test mode.
13. Perform steps 2 and 3 again.
14. Compare the density of the test patterns printed before (step 3) and after (step 13) replacement and
adjust the density so that they are equivalent in level.
. When adjusting to a darker level in density
Perform steps 7 to 10, then, in step 11, tap the one-level darker icon (top of the right column). To
adjust to an even darker level, repeat steps 7 to 10, then, in step 11, select an even darker icon.
. When adjusting to a lighter level in density
Perform steps 7 to 10, then, in step 11, tap the one-level lighter icon (third from the top of the left
column). To adjust to an even lighter level, repeat steps 7 to 10, then, in step 11, select an even
lighter icon.
DPP-EX7 V1
3-3