To turn your
player on
To turn your
player off
Resetting the
player
1.
Press and hold down the POWER button.
2.
Keep on holding the POWER button until the startup screen appears.
The Now Playing screen appears. Otherwise, check that your player and the DC Adapter are
properly connected.
If your player is locked, you must unlock your player.
1.
Press any button.
2.
In the popup that appears, Scroll Select "the tick".
3.
Press and hold the POWER button for at least 5 seconds.
The player should turn off.
If your player stops responding, reset the player. This should not cause you to lose
any data or audio files, unless you were in the middle of recording or transferring an
audio file. You can check for the audio file in your music library later. See "Using
the Music Library" on page 3-5.
To reset the player: Insert the end of a thin object (like a straightened paperclip) into
the Reset Hole.
Setting up your player 2-7