Indicating The Bluetooth Connection Is Lost; Turning The Bluetooth Audio On (Routing The Audio From The Radio To The Headset); Turning The Bluetooth Audio Off (Routing The Audio From The Headset To The Radio) - Motorola APX 6000 User Manual

OR
If the connecting process is immediately following the
pairing process and the connecting process fails to
complete within the 6 seconds, the radio sounds a
decremental-pitched tone to indicate unpaired. The display
shows <Device Type> UNPAIRED. Repeat step 1 to re-
initiate the pairing process.


Indicating the Bluetooth Connection is Lost

a
The radio shows when the devices have a Bluetooth
connection. Below is the scenario and radio indications when
the connection is interrupted.
Procedure:
1
The Bluetooth icon starts blinking for 10 seconds. The radio
sounds an decremental-pitched tone and the display shows
<Device Type> alternates with CON LOST.
2
If the Bluetooth device successfully re-connects before the
Bluetooth Drop Timer expires, the display shows momentary
<Device Type> CONNCTED, and
OR
If the Bluetooth device fails to re-connect within 10 seconds,
a
the blinking is replaced by a persistent
52
English
a
shows persistently.
b
.

Turning the Bluetooth Audio On (Routing the
Audio from the Radio to the Headset)
Procedure:
1
Press the preprogrammed button to route the audio from the
radio to the headset.
2
A short, medium-pitched tone sounds. The display shows
HDSET ON.

Turning the Bluetooth Audio Off (Routing the
Audio from the Headset to the Radio)
Procedure:
1
Press the preprogrammed button to route the audio from the
headset to the radio.
2
A short, medium-pitched tone sounds. The display shows
SPKR ON.