Viewing And Editing Vlan Settings; Figure 34 Static Vlan: Summary Table; Table 16 802.1Q Static Vlan; Table 17 Static Vlan: Summary Table - ZyXEL Communications GS-3012F User Manual

The following table describes the labels in this screen.

Table 16 802.1Q Static VLAN

LABEL
Active
Name
VLAN Group
ID
Port
Control
Tagging
Add
Cancel
Clear

7.2.3 Viewing and Editing VLAN Settings

To view a summary of the VLAN configuration, scroll down to the summary table at the
bottom of the Static VLAN screen.
To change the settings of a rule, click a number in the VID field.

Figure 34 Static VLAN: Summary Table

The following table describes the labels in this screen.

Table 17 Static VLAN: Summary Table

LABEL DESCRIPTION
VID This field displays the ID number of the VLAN group. Click the number to edit the VLAN
settings.
Active This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
Name This field displays the descriptive name for this VLAN group.
Delete Check the rule(s) that you want to remove in the Delete column, then click the Delete
button.
Cancel Click Cancel to clear the Delete check boxes.
Chapter 7 VLAN
DESCRIPTION
Select this check box to enable the VLAN.
Enter a descriptive name for this VLAN group for identification purposes.
Enter the VLAN ID for this static VLAN entry; the valid range is between 1 and 4094.
The port number identifies the port you are configuring.
Select Normal for the port to dynamically join this VLAN group using GVRP. This is the
default selection.
Select Fixed for the port to be a permanent member of this VLAN group.
Select Forbidden if you want to prohibit the port from joining this VLAN group.
Select TX Tagging if you want the port to tag all outgoing frames transmitted with this
VLAN Group ID.
Click Add to save the new rule to the switch. It then displays in the summary table at
the bottom of the screen.
Click Cancel to reset the fields to your previous configuration.
Click Clear to clear the fields to the factory defaults.
GS-3012/GS-3012F User's Guide
76