Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Using the alignment posts, align and place the speakers on the palm rest.
2
Route the speaker cable through the routing guides on the palm rest.
3
Turn the computer over.
4
Slide the speaker cable through the slot on the computer base and
connect the speaker cable to the system board.
Post-requisites
1
Follow the procedure from step 2 to step 6 in
2
Replace the keyboard.
3
Follow the procedure from step 3 to step 6 in
4
Replace the
base
5
Replace the battery.
50
computer. After working inside your
panel.
After working inside your
"Replacing the palm
"Replacing the hard
rest".
drive".