TC-L32C22
8 Measurements and Adjustments
8.1.
Voltage chart of A-board
8.2.
Picture level adjustment (RF)
Instrument Name
1. REMOTE TRANSMITTER
2. Ex. Signal (Sprit color bar)
Adjustment or Inspection Procedure
<procedure>
1. Receive the Sprit color bar.
(Screen mode: ZOOM or FULL Picture mode: DYNAMIC AI: OFF AI Picture: OFF)
*BACK LIGHT +30
<Inspection>
1. Enter Service mode, and select MAIN_ADJ PICTURE.
Volume UP/DOWN key makes GAIN displayed under PICTURE to set.
Pushing the remote controller [OK] key for about 3 seconds, GAIN is suited
to the adjustment value automatically.
VOLTAGE
TEST POINT
STB3.3V
TP4716
SUB5V
TP4724
SUB9V
TP2300,TP2301
SOUND15V
TP2765
PANEL12V
TP5413
5VS
TP2768
SUB6V
TP2767
TCON13.7V
TP7019
TCON2.5V
TP7021
TCON31V
TP7031
TCON-6V
TP7014
(The Sprit Color Bar Pattern)
SPECIFICATION
(Reception state)
3.3 ± 0.16 V
5 ± 0.25 V
9 ± 0.45 V
17 ± 0.85 V
12 ± 0.6 V
5.7 ± 0.28 V
5.7 ± 0.28 V
13.7 ± 0.41 V
only miniLVDS model
2.5 ± 0.12 V
31 ± 31 V
-6 ± 0.6 V
32
Remarks
Remarks