Advertisement
MAKING CALLS
Function
Answer a second
incoming call
Disable the
indicator light
Note: Some features are phone/network dependent.
AUDIO TONES
Audio Tone
Ring tone
Single high tone
High to low tone
Single high tone when
pressing volume button
Two ascending tones
Two descending tones
Low to high tone
No audio indications;
deteriorating quality
Two tones
repeated every 30 sec.
CONTINUED
Action
Tap the Call button
First slide the switch
toward charging plug
(to turn headset off),
then press and hold
both Volume
buttons AND slide
the switch towards
the microphone (to
turn headset on)
Headset Status
Incoming call
Phone network not
available
End call
Volume at minimum
or maximum
Mute enabled
Mute disabled
Connection
confirmation/voice
activation
Out of range
Low battery
INDICATOR LIGHTS
With the Charger Plugged In
Headset Indicator
Steady red
Off
With No Charger Plugged In
Headset Indicator
Off
Steady purple
Steady blue
10 rapid purple flashes
Slow blue flash
Quick blue flash
Slow blue pulse
Slow purple pulse
Red flash
Quick red flash
Note: After 30 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.
Headset Status
Charging
Charging complete
Headset Status
Power off
Powering up
Pairing/connection
mode
Connection successful
Standby (not on call)
Incoming call
Connected (on a call)
Connected
(on a muted call)
Idle (not connected)
Low battery
Hide quick links:
Advertisement
