Discharge Chute Crank - Ariens deluxe 24 Quick Start Manual
Hide thumbs
Also See for deluxe 24:
- Service manual (74 pages) ,
- Operator's manual (48 pages) ,
- Owner's/operator's manual (46 pages)
Table of Contents
Advertisement
1.
Insert the short end of the chute crank into the hole in the front
of the control panel.
NOTE: Be careful not to damage nylon bushing when attaching
crank to the dash.
2.
Connect the chute crank to the pinion gear on chute with
hairpin.
3.
Orient the chute and pedestal to its most vertical position and
tighten pedestal hardware to 15 – 31 lbf-ft (20 – 42 N•m).
Step Three: Install
Discharge Chute Crank
Hide quick links:
Advertisement
Table of Contents
