Installing The Software; Windows 3.1 - Panasonic KX-P1131 Operating Instructions Manual

18
Installing the Software
These Setup Disks (DOS Utilities & Printer Driver for Windows®3.1, 95 & 98 disk, Printer DriverforWindows
NT® 3.5x & 4.0) can only be used in an IBM-PC or a compatible computer with a 3.5" floppy disk drive.
Before using the Setup Disk, it is recommended that you make a back-up copy and store the original in a safe
place.
The following steps will automatically create a directory called P1131 and copy Control Panel Software
(CPS1131.EXE) and Command Reference utility (CMDREF.EXE) from the DOS Utilities & Printer Driver for
Windows® 3.1, 95 & 98 disk to your C Drive. (You can change the directory and drive.)
N~:
J
• Control Panel Software and Command Reference utility cannot be installed on Windows NT.
-
Program Function
Control Panel Software
Allows you to view and change the printer settings on the computer screen.
Command Reference utility Allows you to access a detailed explanation of each software command on the
computer screen.
Follow the steps below for installation.
1 Insert the DOS Utilities & Printer Driver for
Windows® 3.1, 95 & 98 disk into drive A (or
B).
2
Type A: (or B:) and press (Enter).
Windows 3_1
Program
3
4
Printer Driver A printer driver is the part
Type SETUP and press
centerJ.
Follow the instructions on your computer
screen.
Function
of the software that allows the software to
communicate with the printer via the interface in use.
Control Panel Software Allows you to view and change the printer settings on the computer screen.
Command Reference Allows you to access a detailed explanation of each software command on the
utility computer screen.
Follow the steps below for installation.
1
2
Insert the DOS Utilities & Printer Driver for
Windows® 3.1,95 & 98 disk into drive A (or
B).
Click
I
File
I
from the Program
Manager window.
3
4
5
Click
I
Run ...
1 .
Type A:\ SETUP (or B:\ SETUP) and then
press (Enter) (or click 10K
1>.
Follow the instructions on your computer
screen.