Reset And Recovery Mode - TrekStor SurfTab breeze 7.0 plus Operating Instructions Manual

18) Reset and recovery mode

Reset
If your SurfTab "freezes" and no longer responds, you can restart the device by
resetting it. To do so, press the on/off switch for approximately 20 seconds.
The SurfTab restarts.
Putting the SurfTab into recovery mode/loading the factory settings
The "recovery mode" allows you to reset the device to its factory settings, delete
forgotten passwords or delete the memory of the SurfTab, for instance.
As system-related settings can be specified in recovery mode, you should only use
a
this mode if you have the necessary technical knowledge.
a) Please switch off your SurfTab.
b) Press the "volume +" button and keep it pressed.
c) Please also press the on/off switch and keep it pressed.
d) As soon as the TrekStor logo appears, release the on/off switch.
e) A little while later, the recovery mode menu is displayed. You can now
release the "volume +" button as well.
f ) Use the volume buttons to navigate through the menu, and use
the on/off switch to select an option.
To restore the SurfTab to its factory settings, select the option
i
" /
wipe data FactorS reSet
text files, bookmarks and so on) and the settings that you have specified
(background, passwords and so on) will be deleted.
g) To exit the recovery mode, use the volume button to select the "
" option and confirm by pressing the on/off switch. Your SurfTab now
noW
exits the recovery mode and restarts.
You can also reset the SurfTab to its factory settings using
i
"S " "b
+
ettingS ackup
EN
22
". WARNING: All the files that you have stored (photos,
& ".
reSet
Reboot system