Panasonic LUMIX DMC-LX100 Operating Instructions Manual page 82

About Programme Shift
The function for maintaining the same exposure (brightness) while changing the shutter
speed and aperture value combination is called "Programme Shift". You can use
"Programme Shift" to take pictures by adjusting the shutter speed and aperture value
even in [Program AE] Mode.
<Example of Programme Shift>
1 2
(Aperture value)
1.4
2.0
2.8
4.0
5.6
8.0
11
16
22
1
1/2
Programme Shift amount
Programme Shift diagram
Programme Shift limit
●
EV is an abbreviation of "Exposure Value", a unit indicating the amount of exposure. The EV
changes with the aperture value or the shutter speed.
Not available in the following cases:
●
Programme Shift cannot be used in the following cases:
• During motion picture recording
• When [Sensitivity] is set to [
82
Taking pictures after setting the aperture value and shutter speed
3 4 5 6 7
1/4 1/15 1/60
1/8 1/30
]
8 9 10 11 12
1/250 1/1000
1/125 1/500 1/2000
Recording mode
(EV)
13 14 15 16
17
18
19
20
21
22
23
24
25
(Shutter speed)
1/4000 1/16000
1/8000
SQW0038