Displaying the appropriate screen for specific
recording conditions
Checking the area where overexposure may occur ([Zebra Pattern])
Recording mode:
You can check the area in a picture that is brighter than a certain brightness, which could
result in overexposure, by displaying such an area using a zebra pattern. You can also
set the brightness to be represented by the zebra pattern.
→
[Custom] → [Zebra Pattern]
Displays an area brighter than a certain brightness using a
[ZEBRA1]
right-leaning zebra pattern.
Displays an area brighter than a certain brightness using a
[ZEBRA2]
left-leaning zebra pattern.
[OFF]
Sets the brightness to be displayed for each zebra pattern.
[Zebra 1] / [Zebra 2]
1
[SET]
166
Use
to select the brightness and then press [MENU/SET]
• The range of brightness you can select from is [50%] to [105%]. The [OFF]
setting is available for [Zebra 2]. When [100%] or [105%] is selected, only the
overexposed areas are displayed with the zebra pattern. When a smaller numeric
value is set, the range of brightness to be displayed by each zebra pattern will
increase.
Functions for specific subjects and purposes
—
SQW0038