Specifications; Ml1120 Eco - Oki ML1120 User Manual

S
PECIFICATIONS
ML1120
ECO
ITEM
Product Name
Model No.
Print method
Print head
Print direction
Print speed
High Speed Draft (HSD)
Near Letter Quality (NLQ)
Utility
Line Feed (LF) time
Form Feed (FF) speed
Paper feed control
Duplication capability
Feeding direction
Feeding mode
Continuous forms tape tail
detection method
ML1120/ML1190 eco User's Guide – Specifications > 99
SPECIFICATION

ML1120 eco

D22400B
Impact dot matrix
9 pins, 0.3mm (0.012 in) diameter
Bi-directional, short-line-seeking printing
333cps @ 10 cpi
62.5 cps @ 10 cpi
250 cps @ 10 cpi
Approximately 52 ms per line for LF of
4.23 mm (1/6 in)
Approximately 101.6 mm/s (4 in/s)
Paper feed: yes
Vertical tab: yes
Direct line feed: yes
Continuous forms: the original page +4 more
pages (total maximum paper thickness less
than 0.325 mm)
Cut sheet: the original page +4 more pages
(total maximum paper thickness less than
0.325 mm)
Feed forward
Feed backward
Feed upward
Friction feed mode (top)
Pin tractor feed mode (rear)
Pin tractor feed mode (bottom)
Detected when remaining paper is
approximately 46 mm long. It can, however,
print till about 6 mm from the paper bottom
(measured at the centre of the characters).
(The print accuracy of the last page cannot
be guaranteed.)