Installation; Technical Specifications - Lincoln Electric Commander 500 Cummins Operator's Manual

A-1
TECHNICAL SPECIFICATIONS - COMMANDER 500 CUMMINS (K1846-1 & -2)
Make/Model Description
Cummins 4 cylinder
B3.3 56 HP(42kw)
Diesel Engine @ 1800 RPM
Duty Cycle
100%
60%
50%
Welding Range
30 - 575 Amps CC/CV
20 - 250 Amps TIG
HEIGHT 2
42.0 in.
1066.8 mm
1. Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
2. Top of Enclosure. Add 5.6" (142.2mm) for exhaust.

INSTALLATION

INPUT - DIESEL ENGINE
Speed (RPM)
High Idle 1900
Low Idle 1475
Full Load 1800
RATED OUTPUT - WELDER
Welding Output
500 Amps (DC multi-purpose)
550 Amps (DC multi-purpose)
575 Amps (DC multi-purpose)
OUTPUT - WELDER AND GENERATOR
Open Circuit Voltage
80 Max OCV @1900 RPM
PHYSICAL DIMENSIONS
WIDTH
31.5 in.
800.1 mm
COMMANDER 500 CUMMINS
Displacement Starting
System
199 cu. in 12VDC battery
(3.3 L) & Starter
Bore x Stroke
3.74" x 4.53"
(95mm x 115mm)
Volts at Rated Amps
40 Volts
36 Volts
35 Volts
Auxiliary Power
120/240 VAC
12,000 Watts, 60 Hz.
100% Duty Cycle
DEPTH
63.1 in.
1602.7 mm
A-1
Capacities
Fuel: 25 gal.
94.6 L
Oil: 8.0 Qts.
7.5L
Coolant: 2.6 Gal.
11.8 L
1
WEIGHT
1625 lbs.(737 kg)
( Approx.)