Function (Jam Counter Rom Ver.) - Toshiba e-STUDIO165 Service Manual

2.2.10

FUNCTION (Jam counter ROM ver.)

Press the USER FUNCTIONS key and enter the SERVICE MODE. Then, select LISTS and print a
function list so that the user set information will be printed on the first sheet, and the jam counter on the
second sheet.
The same data as printed in Chap. 2.2.9 [C] is printed on the third and fourth sheets.
<Key used in operation>
USER FUNCTION
02.LISTS
ENTER
2.FUNCTION
ENTER
Print list
Print Data (PAGE:002)
JAM COUNTER
DOCUMENT
PAPER
TYPE1 JAM
TYPE2 JAM
TYPE3 JAM
TYPE4 JAM
TYPE5 JAM
TYPE6 JAM
TYPE7 JAM
FLASH ROM
PROGRAM
FUNCTION
LANGUAGE
SCANNER
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Press the
USER FUNCTION key
Enter SERVICE MODE
Select menu
Use or keys
Fig. 2-29
Jam information
Jammed original count
Total count of TYPE1 to 7
Jam inside the equipment (at or near the paper feeding section)
Jam inside the equipment (at or near the center section)
Jam inside the equipment (at or near the paper exit section)
Jam at the option (paper feed)
Jam between the option and the equipment (at the transport path)
Cover open jam (during copying)
Other paper jams
Version information
System firmware version <T28xSY0xxxx> and creation date
Function table data version <T28xSY1xxxx> and creation date
Language data version <T28xSY2xxxx> and creation date
Scanner (ADF/RADF) version <Vxxxx>
2 - 111
<Display messages>
e-STUDIO165/167/205/207/237
ERROR CODE AND SELF-DIAGNOSTIC MODE
2