Dual XGPS190 Owner's Manual page 8

XGPS190
tooth ID and will vary from device to device.) At
this point, the Android device may say
and the blue Bluetooth
but not connected
indicator on the XGPS190 will continue to blink
slowly.
• If you are interested in using the XGPS190
with GPS-enabled applications other than
EFB apps, you will need to install a helper
app on your Android device. This app runs
in the background and will let apps receive
GPS information from the XGPS190. Several
free helper apps are available on the Android
Market. Please see the FAQ section on the Dual
website (http://XGPS190.dualav.com/faq.html)
for specific recommendations and installation
instructions. A helper app is not required for
use with most EFB apps. It is only required
for car & marine navigation apps or other
apps which only use GPS information.
If you need additional help connecting the
XGPS190 to your device, please contact custom-
er service (send e-mail to cs@dualav.com or call
866-382-5476). However, due to the enormous
variety of available smart phones and tablets, you
may need to contact the manufacturer of your spe-
cific device for additional instructions.
14
Paired
Charging
To charge, connect the XGPS190 to a charger us-
ing a standard USB cable (included).
Two chargers are included with the XGPS190: a
120-240VAC wall charger and a 12-30VDC ciga-
rette lighter adapter charger. Other chargers can
be used, but they must be rated to supply at least
2.1A of charging current. To avoid charging prob-
lems, we recommend using only chargers from
high quality manufacturers.
NOTE: Laptop USB ports will not supply enough
charging current to the XGPS190, and should not
be used for charging.
XGPS190
15