Sony SRG-120DH Operating Instructions Manual page 32

Symptom
LAN communication is not
available with a computer
connected to the camera.
The camera does not work
when connected one-to-one
to the IP remote controller.
The camera cannot be
operated at all.
32
Troubleshooting
Cause
The computer is not correctly
connected to the camera.
The computer is not correctly set. Check the precautions in the
A crossover cable is not used.
-
Remedy
Make sure the connection
between the computer and
camera is made correctly.
Check that the VISCA/LAN
switch (BOTTOM switch) is set
to ON (page 10).
setting of the dedicated PC
application.
Use a crossover cable for one-to-
one LAN connection.
Pull out the plug of the power
cord from the AC outlet, then
reinsert it into the AC outlet after
waiting a while.
Check that the BOTTOM
switches 2, 5, 6, 7 and 8 are set to
OFF.