Canceling The Programme; End Of Programme - Beko DPU 7305 XEL User Manual

Canceling the programme

If you want to stop drying and cancel the programme
for any reason after the machine has started to run,
press and hold the Start / Pause / Cancel button for 3
seconds. Lint Filter Cleaning and Water Tank warning
symbols light up and "End" label appears on the display
as a reminder at the end of this period.
As the inside of the machine will be
A
excessively hot when you cancel the
programme while the machine is running,
activate the ventilation program to cool
it down.
Machine will stop if you turn the
C
Programme Selection knob while
it is operating. In this case, current
programme is aborted and the new
programme information appears on the
display.
56 / 64 EN

End of programme

Lint Filter Cleaning and Water Tank warning symbols
light up in the programme follow-up indicator and "End"
label appears on the display when the programme
comes to an end. The loading door can be opened and
the machine becomes ready for a second cycle.
Press On / Off button to switch off the machine.
If Anti-creasing function is activated and
C
the laundry is not taken from the machine
at the end of the programme, 2-hours
Anti-creasing programme is activated.
C
Clean the lint filter after each drying. (See
"Lint Filter / Loading Door Inner Surface")
C
Drain the water tank after each drying
cycle. (See "Draining the water tank")
Dryer / User Manual