Auxiliary Functions; Warning Symbols; Dryness Level - Beko DPU 7305 XEL User Manual

Auxiliary functions

Audio Warning
The machine will give an audio warning when the
programme comes to an end. If you do not want the
machine give an audio warning, press the Volume Level
button repeatedly until "x" appears on the display. Use
the same button to adjust the volume level.
C
You can activate this function either
before or after the programme starts.
Cancel Audio warning
audio warning level 1

Dryness level

Used to adjust the required dryness level. More drying is
performed compared to the default settings when "+"
sign appears and less drying is performed when "-" sign
appears. Programme duration can change depending on
the selection.
C
You can activate this function only before
the programme has started.
Anti-creasing
You can use Anti-creasing function to prevent laundry
from creasing if you will not take the laundry out after
the program has come to an end. This program rotates
the laundry in every 240 second for 2 hours to prevent
creasing.
Anti-creasing is activated but the programme is still
running in the first display image below. Drying cycle is
completed and the Anti-creasing step has started in the
second display image.
52 / 64 EN
Audio warning Audio warning
level 2 level 3
C
Press Anti-creasing button to activate this
function.
Changing the contrast
Adjust the display contrast in order to make the symbols
on the display appear clearer. It may particularly be
necessary to change the contrast setting of the display
when the dryer is installed over a washing machine.
Press and hold the Spin Speed / Timer Programme
button for 3 seconds.
When the contrast is changed, all symbols on the
display will appear for 3 seconds in order to indicate
that the process is complete.
C
Perform the same procedure to revert
back to the previous contrast setting.

Warning symbols

C
Warning symbols may differ according to
the model of your machine.
Lint filter cleaning
When the programme is completed, a warning symbol
will appear to remind that the filter needs to be cleaned.
C
If the Filter Cleaning symbol flashes
continuously, refer to "Troubleshooting"
section.
Water tank
When the programme is completed, a warning symbol
will appear to remind that the water tank needs to be
drained.
If the water tank becomes full while the programme
is running, the warning symbol will start to flash and
machine will pause. Drain the water in the water tank
and press Start / Pause / Cancel button to resume
the programme. The warning symbol turns off and the
programme resumes operating.
Dryer / User Manual