Using The Timer - Panasonic SC-PM46 Operating Instructions Manual

Table of Contents

Advertisement

Using the timer

Record Timer is applicable for
Setting the clock
Setting the clock
This is a 24-hour clock.
Press [CLOCK/TIMER] to select "CLOCK".
1
Each time you press the button:
˚ PLAY
CLOCK
Original display
Within 5 seconds, press [ /4] or [ /¢] to set the time.
2
Press [CLOCK/TIMER] again to confirm.
3
Displaying the clock
Press [CLOCK/TIMER] to display the clock for few seconds.
Note
The clock may lose or gain minutes over a period of time. Readjust
as necessary.
Using the play or record timer
Using the play or record timer
You can set the timer to come on at a certain time to wake you up
(play timer) or to record from the radio or music port source (record
timer).
Preparation
Turn the unit on and set the clock.
Timer
Action
Play timer
Prepare the music source you want to listen
to; cassette, disc, radio, USB or music port
source, and set the volume.
Record timer
Check the cassette's erasure prevention
tabs (➡ page 9), insert the cassette
Southeast Asia
(➡ page 9) and tune to the radio station
(➡ page 10) or select the music port source
(➡ page 13).
Press [CLOCK/TIMER] repeatedly to select your desired
1
timer.
˚ PLAY
CLOCK
Original display
Within 5 seconds, press [ /4] or [ /¢] to set the
2
starting time.
Start time
Play timer indicator
Press [CLOCK/TIMER] to confirm.
3
4
Repeat steps 2 and 3 to set the finishing time.
Finish time
Southeast Asia
only.
Southeast Asia
˚ REC
Southeast Asia
˚ REC
Southeast Asia
Record timer indicator
Southeast Asia
To activate the timer
5
Press [˚PLAY] (
Southeast Asia
your desired timer.
˚ PLAY
no display (off)
6
Press [y] to turn off the unit.
The unit must be off for the timers to operate.
To
Action
change the settings
Repeat steps 1 to 4 and 6.
change the source
1) Press [
or volume
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
check the settings
Press [CLOCK/TIMER] repeatedly to select
˚
(when the unit is on
PLAY or
or in standby mode)
cancel
Press [˚PLAY] to clear the timer indicators
from the display.
Note
• The play timer and record timer cannot be used together.
• The play timer will start at the preset time, with the volume
increasing gradually to the preset level.
• The record timer will start 30 seconds before the set time, with the
volume muted.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer comes on,
the system turns on and engages MUSIC PORT as the source. If
you wish to playback or record from the portable audio equipment,
activate the equipment's play mode and increase the volume. (See
the portable audio equipment's instruction manual.)
Using the sleep timer
Using the sleep timer
This function enables you to turn off the unit automatically after the
set time.
Press [SLEEP] repeatedly to select your desired time.
Sleep timer indicator
To cancel
Press [SLEEP] to select "OFF".
Changing the remaining time
Press [SLEEP] to show the remaining time, and press [SLEEP] again
to select your desired time.
Note
• The play and sleep timer or the record and sleep timer can be used
together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.
: [˚PLAY/REC]) to turn on
Southeast Asia
˚ REC
˚
PLAY] to clear the timer
˚
REC.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents