Battery installation
Install the battery as show below.
.
Plug the battery
connector securely
into the socket inside
the handset battery
compartment, matching
the color-coded label.
ChargE light
4.
Charge the handset by placing it
face forward in the telephone base
or charger. The ChargE light is on
when charging.
ImPorTanT InformaTIon:
Use only the supplied rechargeable battery or replacement battery (model BT66342). To order,
visit our website at
1 (866) 288-4268
In Canada, dial
2.
Insert the supplied
battery with the label
ThIs sIDE uP facing up
as indicated.
www.telephones.att.com
To replace the battery, press the tab
and slide the battery compartment
cover downwards. Lift out the old
battery and disconnect it from the
handset. Follow the instructions above
to install and charge a new battery.
or call
.
4
3.
Align the cover flat
against the battery
compartment, then
slide it upwards until
it clicks into place.
1 (800) 222-3111
.