Clock Setting - Pioneer PDP-5050SX Operating Instructions Manual

Tuner Setup
Selecting digital closed caption parameters
Use the following procedure to change such parameters of
digital closed captions as font size, font type, foreground and
background colors.
1
Press HOME MENU.
2
Select "Tuner Setup". ( /
3
Select "Closed Captions". ( /
4
Select "Digital Settings". ( /
5
Select "Font Size", "Font", or any other item. ( /
ENTER)
6
Select the desired parameter. ( /
Closed Captions Digital Settings
Digital Settings Font Size
7
Repeat steps 5 and 6 as necessary. ( ,
8
Press HOME MENU to exit the menu.
The following table shows the parameters selectable for each
item.
Item Selection
Font Size Auto/ Large/ Standard/ Small
1
Font Auto/ Font 1/ Font 2/ Font 3/ Font 4/
Font 5/ Font 6/ Font 7
Font Color Auto/ Black/ White/ Red/ Green/ Blue/
Yellow/ Magenta/ Cyan
Font Opacity Auto/ Solid/ Transparent/Translucent/
Flashing
Background Color Auto/ Black/ White/ Red/ Green/ Blue/
Yellow/ Magenta/ Cyan
Background Opacity Auto/ Solid/ Transparent/ Translucent
1
Font 1 (monospaced with serifs)/ Font 2 (proportionally spaced with
serifs)/ Font 3 (monospaced without serifs)/ Font 4 (proportionally
spaced without serifs)/ Font 5 (casual font)/ Font 6 (cursive font)/ Font
7 (small capitals font)
With "Auto" selected, parameters specified by the provider are
used; if not specified by the provider, the bolded default
parameters are used. If you select parameters other than
"Auto", the selected parameters are used regardless of
provider's specifications.
09-PDP5050SX-Eng (27-35)
then ENTER)
then ENTER)
then ENTER)
then
then ENTER)
Font Size
Large
Standard xxxxxxxxxxxxxxxxxxxxx
Small xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Home Menu Exit
/ )
35

Clock Setting

With "Auto Set" selected for Clock Setting, the Plasma Display
acquires and sets time information automatically. You can also
manually set the correct time. If you disconnect the power cord
from the power outlet or power blackout occurs, the set time is
cleared.
1
Press HOME MENU.
2
Select "Tuner Setup". ( /
3
Select "Clock". ( / then ENTER)
4
Select "Time Zone". ( / then ENTER)
5
Select a time zone for your area. ( /
Clock Time Zone
Atlantic
Time Zone
Eastern
Central
Mountain
6
Select "D.S.T." ( , / , then ENTER)
7
Select "Applies" or "Does Not Apply". ( /
• Make this selection, depending on whether summer
time is employed in your area.
Clock Daylight Savings Time
D.S.T.
Applies
Does Not Apply
8
Select "Auto/Manual Set". ( ,
9
Select "Auto Set" or "Manual Set". ( /
10
If you select "Auto Set", select an antenna (A or B) and a
channel number using /
Clock Auto/Manual Set Clock Set Channel
Auto/Manual Set •Auto Set Ant. A
• The date and time will be automatically corrected using
data from the selected channel.
If you select "Manual Set", manually set the date and
time using / , / and ENTER.
Clock Auto/Manual Set Date and Time
3
4
Auto/Manual Set •Manual Set
3 /17/04
5
6
11
Press HOME MENU to exit the menu.
05.2.25, 10:17 AM
then ENTER)
then ENTER)
Current Time:
xxxxxxxxxxxxxxxxxxxxx
9:55 pm EDT
xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu
Exit
then ENTER)
Current Time:
xxxxxxxxxxxxxxxxxxxxx
9:56 pm EDT
xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu Exit
/ , then ENTER)
then ENTER)
and ENTER.
Current Time:
xxxxxxxxxxxxxxxxxxxxx
11:58 pm PDT
2.0 xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu Exit
Current Time:
xxxxxxxxxxxxxxxxxxxxx
11:58 pm PDT
xxxxxxxxxxxxxxxxxxxxx
11:58pm
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu Exit
09
35
En