Using Your Zotac Zbox; Configuring A Wireless Connection - Zotac ZBOX Instruction Manual

ZOTAC ZBOX
• MassStorage Driver
• Asmedia USB Controller
• USB Charger (optional)
Note: If you want to use high-amperage USB
charging for smartphones and tablets, please
install the driver USB Charger driver.
 Each driver must be installed individually to
ensure proper operation of the ZOTAC ZBOX.
3. Select the driver you want to install. The driver
installer should launch.
4. Follow the onscreen instructions to install the
drivers.
5. Restart the system.

Using your ZOTAC ZBOX

Configuring a wireless connection

Please follow the instructions below to connect to a wireless network:
1. Double-click the wireless network icon (pic) in the notification area.
2. Select the wireless network you want to connect to from the list and
click Connect.
3. After connection is established, you will see "Connected."
Note 1: For security concerns, Do NOT connect to an unsecured network,
otherwise, the transmitted information without encryption might be visible to
others.
Note 2: Enter the network security key if necessary.
18